- RAG Driveshaft USA CORP.
- Angular Contact Ball Bearings Ball Bearings Cam Follower and Track Roller - Stud Type
English
- Address654 Teague Court, Auburn, AL 75398, U.S.A.
- Phone(Working Time)+1-384-391-3200
- Phone(Nonworking Time)+1-384-391-3200
Insert Bearings Spherical OD
Contact NowBall Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| LINK BELT UG228HL Insert Bearings Spherical OD | 25 mm | 1430 kgf | 70 mm | 800 kgf |
| LINK BELT UG216HL Insert Bearings Spherical OD | 7/8 in | 1780 lbf | 3-1/8 in | Contact with Slinger |
| LINK BELT UG211NL Insert Bearings Spherical OD | 4.0000 in | Class 3 | 1.0625 in | No Hole |
| LINK BELT U232E3L Insert Bearings Spherical OD | 140 mm | Expansion Bearing (Floating) | 241.30 mm | -20 to +100 °C |
| DODGE INS-SXV-107 Insert Bearings Spherical OD | 3.7650 in | 288080 lbs | 7.1250 in | Machine Brass |
| DODGE INS-SXV-108 Insert Bearings Spherical OD | 30 mm | 112.7 mm | 57.2 mm | 101.6 mm |