AMI BNFL5-16MZ2CB Flange Block Bearings

Designation of open end cover:SCOE204-15; d:15 mm; L1:40 mm; G:R1/8"; T max.:100 °C; Designation of bearing:EX202G2L3; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; H:33.3 mm; L:130 mm;

N:18mm; H2:128 mm; H:61.3 mm; Designation of housing:PLE211-; Recommended tightening torque for set screw:16.8 Nm; H1:23.2 mm; Weight:3.9 kg; C0:29.2 kN; Designation of bearing:UC211-35G2; A1:39.5 mm;

d:12 mm; T min.:-20 °C; Weight:0.63 kg; J:78 mm; C:12.8 kN; A1:12 mm; A2:41.5 mm; B1:43.5 mm; N:10mm; Designation of bearing:EX201G2T20;

J:130 mm; C:25.7 kN; Designation of housing:FLZ207-; s1:16 mm; A:32.5 mm; G:R1/8"; T max.:100 °C; A2:40.5 mm; N:14mm; L:94 mm;

T min.:-20 °C; C0:11.2 kN; H3:80; A:21 mm; A1:9.5 mm; C:19.5 kN; G:M6x1; B:36.4 mm; d:28.58 mm; S:18.2 mm;

da max:99 mm; Nlim (oil):3,900 rpm; Manufacturer Name:NTN; Static load, C0:430 kN; rs min:2.1 mm; Fatigue limit load, Cu:49 kN; D:170 mm; Da max:159 mm; r1s min:2.1 mm; Characteristic outer ring frequency, BPF0:5.21 Hz;

Bearing Outer Ring Material:Steel; Ball Grade:Class 10; Grease Type:Unirex N2; Housing Coating:Powder Coat; Ring Size:Standard; Retainer Type:Std Retainer; Bearing Duty:Medium Duty; Ship Weight:9.35 LB; Self Aligning:Self Centering; Bearing Inner Ring Material:Steel;

Characteristic rolling element frequency, BSF:6.07 Hz; Static load, C0:119 kN; ra max:1.5 mm; D:120 mm; Min operating temperature, Tmin:-20 °C; Dc max:106 mm; d1:84.4 mm; E:108.5 mm; Mass (without HJ ring):1.05 kg; d:65 mm;

G:M6x1; Dz:46 mm; Designation of bearing:ES202G2; H:27 mm; d1:27.2 mm; J:88.5 mm; H2:54 mm; C:9.55 kN; s1:23.05 mm; L:119 mm;

Designation of bearing:UC206G2; Designation of open end cover:SCO206-30; C:19.5 kN; H2:79.5 mm; C0:11.2 kN; Z:52.7 mm; H1:14.5 mm; A1:27.5 mm; A:41.5 mm; B:38.1 mm;

Retainer Type:Max Life Cage; UPC:782476696597; Seal Type:Shield; Ship Weight:5.9 LB; Shaft Attachment (2):Set Screw; Bearing Duty:Medium Duty; Bearing Family:Setscrew Ball Bearin; Expansion Type:Non-Expansion; Manufacturing Plant Location:Rogersville, TN; Ball Material:Steel;

d1:74.5 mm; d:55 mm; B:32.5 mm; Designation of bearing:ES211G2T20; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; Weight:0.87 kg; A2:36.4 mm; T min.:-20 °C;

B:34 mm; G:R1/8"; E:21 mm; C:12.8 kN; C0:6.65 kN; A5:17 mm; Recommended tightening torque for set screw:3.7 Nm; Weight:0.69 kg; G1:M16; s1:30.5 mm;

Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; N2:37 mm; S:15.9 mm; d:30.16 mm; L:113 mm; N1:16 mm; SW:3.18 mm; B:38.1 mm; A:37 mm;

Designation of bearing:US204-12G2T04; Z:22.7 mm; Weight:0.63 kg; T max.:100 °C; C0:6.65 kN; L:100 mm; s1:12.5 mm; e:10 mm; A:25.5 mm; N:12mm;